Sound Control Adjustment (Md20F52 Only); Stereo And Second Audio Program (Sap) - Toshiba MD14F52 Owner's Manual

Sound control adjustment (MD20F52 only)/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
Sound control adjustment (MD20F52 only)
1
Press MENU and then press
option.
2 Press or to select "AUDIO", then press
.
3
Press or to select the item you want to
adjust, then press
BASS:
Press or to adjust the bass sound.
TREBLE:
Press or to adjust the treble sound.
BALANCE:
Press or to obtain an equal sound level from
both speakers.
4
After the desired setting is adjusted, press
MENU repeatedly until the menu screen is
cleared.
3 3 3 3 3 To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
5W20101A [E] (P24-27)
or to select
PICTURE
AUDIO
PICTURE PREFERENCE
/ / / / MENU
Illustration of MD20F52
PICTURE
AUDIO
PICTURE PREFERENCE
/ / / MENU
Illustration of MD20F52
or to adjust the setting.
BASS 0
TREBLE 0
BALANCE 0
/ / / / CANCEL / MENU
Illustration of MD20F52
27
Listening to stereo sound
When the TV is turned on or a channel selection is
made, the "STEREO" will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT to
change to mono sound. The noise should be elimi-
nated. Press it again to return to the stereo sound.
STEREO
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, "SAP" will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
STEREO SAP
To select desired sound
Press AUDIO SELECT to select the desired sound.
SEL. STEREO
MONO + SAP BROADCASTING
MONO SOUND
(MAIN)
STEREO + SAP BROADCASTING
STEREO SOUND
(MAIN)
MONO SOUND
(MAIN)
12/23/05, 14:35
AUDIO SELECT
/ / /
CANCEL
MENU
CH 013
CH 013
SAP SOUND
SAP SOUND
27