Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
36
IMG-359822
37
IMG-359823
© Volvo Car Corporation
Connect the white 2 pin male connector (1) in the pre-routed
cable harness, to the existing white clamped 2 pin female
connector (2) at the rear edge of the wheel housing.
Take a cable tie from the kit and clamp the remaining white
connector (3) on the pre-routed cable harness at existing cables
at the rear edge of the wheel housing.
Applies to cars with a 12V socket
Connect the white 2 pin female connector (1) that was
disconnected from the 12 V socket to the white 2 pin male
connector (2) on the routed cable harness.
Connect the remaining white 2 pin female connector (3) on the
routed cable harness to the 12 V socket.
Towbar, wiring, 13-pin- 31346062 - V1.2
Page 21 / 22
Advertisement
