Temperature Control - Siemens Climatix Series Short Manual

Prerequisites
Parameterization
Parameter
Act controlled tmp.
Temp setpoints
Cascade controller
Min/max ctrlr sply
Hrec damper
Heat recovery
Heating
El heating
Cooling
Extra heating
Extra el heating
Extra cooling
Fan heating
Fan cooling
Fan compensation
Short Manual for Climatix Control System [v. 2.14.10, 2.14.20, 2.14.30 & 2.14.40]
SMCX.130215.02GB
2.7

Temperature control

2.7.1 General
Displays only functions that are enabled in Configuration 1 or Configuration 2. All
other functions are hidden.
Main menu > Unit > Temp. control
Function
Present temperature is used for control. Either supply air, room air or extract air
temperature, depending on the setting and control type.
Go to setpoint page with all setpoints affected by temperature control,
e.g. comfort, economy, cascade min max, deviation alarm, summer-winter
compensation..
Displays heating and cooling setpoint. Go to cascade controller page with
detailed settings.
Go to page for min/max ctrlr sply to parameterize the minimum and maximum
limit controller. You can use the existing supply air sensor to limit the minimum or
maximum allowable supply air temperature if purely room or return air control is
active..
Present value of the mixed air damper control. Go to parameter page for mixed
air damper control.
Present value for heat recovery control. Go to parameter page for heat recovery
control.
Present value for heating register control. Go to parameter page for heating
register control..
Present value for electric heating register control.
Go to parameter page for electric heating register control.
Present value for cooling register control for an additional register. Go to
parameter page for cooling register control.
Present value for heating register for an extra register. Go to parameter page for
heating register control.
Present value for electric heating register control for an extra register. Go to
parameter page for electric heating register control.
Present value for cooling register control for an extra register. Go to parameter
page for cooling register control.
Present value for fan heating sequence. Go to parameter page for fan heating
sequence.
Present value for fan cooling sequence. Go to parameter page for fan cooling
sequence.
Present value for fan temperature compensation. Go to parameter page for fan
temperature compensation.
Page 16