Adding And Erasing Channels Manually; Changing Channels; Selecting The Quick Restart - Toshiba 52HMX84 Owner's Manual

Adding and erasing channels manually

After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE, and then press ENTER
to display the pull-down menu.
SET UP
LANGUAGE
CLOCK SET
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
: S E L E C T ENTER : SET
4. Press y or z to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.

Selecting the Quick Restart

With the Quick Restart feature set to ON, the TV stays in the
standby mode for several minutes after the TV is turned off.
If the TV is turned on from the standby mode, the full picture
appears immediately.
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight QUICK RESTART, and then press
ENTER.
3. Press y or z to select ON or OFF, and then press ENTER.
CUSTOM
ON T I MER
SLEEP T I MER
CC
FAVOR I TE CH
CH LABEL I NG
V I DEO LABEL
BACKGROUND
QU I CK RESTART
: S E L E C T ENTER : SET
28
A D D
E R A S E
O N
O F F
Control touchpad on TV front
TV/VIDEO EXIT CHANNEL VOLUME
x •zy
POWER
TV
LIGHT SLEEP
CABLE/SAT
VCR
1 2 3
DVD
Channel
AUDIO1
AUDIO2 4 5 6
Number
MODE
7 8 9
PIC SIZE
+10
0
100/
ENT
ACTION
MENU
MENU
FAV
ENTER
ENTER
yzx •
FAV
Channel yz
VOL
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL MUTE
SLOW/DIR SKIP/SEARCH
Note:
If Quick Restart is set to OFF and you turn off
the TV, it can take up to several seconds for
the picture to appear when you turn on the
TV again.
If Quick Restart is set to ON and you turn off
the TV, the following will occur for a few
minutes:
• The screen (lamp) lights dimly.
• The fans continue to run.
This is a function of the Quick Restart standby
mode and is not a TV malfunction. If you do
not prefer this, set the Quick Restart feature to
OFF.
When the Quick Restart feature is set to OFF,
if you repeatedly turn the TV on and off in a
short period of time, the useful service life for
the lamp may be shorter than the average
useful service life. See page 60.
MENU
MENU