Using The Locks Menu; Entering The Pin Code; Changing The Pin Code - Toshiba 43H71 Owner's Manual

Using the LOCKS menu

The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.

Entering the PIN code

1. Press MENU, and then press x or • until the LOCKS menu
appears.
LOCKS
V CH I P –
ENABLE BLOCK I NG OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
FRONT PANEL LOCK
OFF
NEW P I N CODE
2. Press y or z to display the PIN code entering mode.
• Blocking reset status:
Set the 4-digit PIN code by
pressing the Number buttons
(0–9), and then press ENTER.
LOCKS
BLOCK NG RESET I
P I N CODE 1 1 1 0
If a wrong PIN code is entered, the message "Incorrect" appears.
Enter the code again, and then press ENTER.
If you cannot remember the PIN code you stored, while in the
PIN code entering mode, press RECALL four times within
5 seconds. The PIN code will be returned to blocking reset status.
LOCKS
V CH I P -
ENABLE BLOCK I NG ON / OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
FRONT PANEL LOCK
OFF
NEW P I N CODE
Continue to set each item following the steps on the following pages.

Changing the PIN code

1. From the LOCKS menu, select
NEW PIN CODE.
2. Press the Number buttons (0–9)
to enter a new 4-digit PIN code.
The numbers you enter will
replace the dashes in the display.
3. Press ENTER. The new PIN
code is now active.
30
• When the PIN code is already stored:
Press the Number buttons (0–9) to
enter the 4-digit PIN code, and then
press ENTER.
LOCKS
BLOCK NG ACTIVE I
P I N CODE 1 2 3 4
LOCKS
V- CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK V I DEO
FRONT RANEL LOCK OFF
NEW P I N CODE 2 5 6 2
LIGHT RECALL POWER
TV
RECALL
CABLE
MUTE TV/VIDEO TIMER
VCR
1 2 3
CH
4 5 6
Number
7 8 9
VOL
CH RTN
100 0
ENT
ADV/
PIP CH
MENU/ENTER
MENU/
FAV FAV
ENTER
yzx •
ADV/
PIP CH
STOP SOURCE PLAY PIP
REC TV/VCR REW FF
STILL LOCATE SWAP