Using The Locks Menu; Changing The Pin Code - Toshiba 43H71 Owner's Manual

Using the LOCKS menu
The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.
Entering the PIN code
1. Press MENU, and then press • or • until the LOCKS menu
appears.
LOCKS
V-CHIP
ENABLE BLOCK I NG OFF
TV RAT I NG )'
MPAA RAT I NG
I,
BLOCKING OPTION )'
CH LOCK _"
VIDEO LOCK OFF
FRONT PANEL LOCK OFF
NEW PIN CODE
2. Press • or • to display the PIN code entering mode.
Blocking reset stams:
Set the 4-digit PIN code by
pressing the Number buttons
(0-9), and then press ENTER.
• When the PIN code is already stored:
Press the Number buttons (0-9) to
enter the 4-digit PIN code, and then
press ENTER.
®@@®@
LOCKS LOCKS
BLO K I NG ACTIVE
Ifa wrong PIN code is entered, the message "Incorrect" appears.
Enter the code again, and then press ENTER.
If you cannot remember the PIN code you stored, while in the
PIN code entering mode, press RECALL four times within
5 seconds. The PIN code will be returned to blocking reset status.
@@@@@@
LOCKS
LIGHT RECALL POWER
Number
MENU/ENTER
MPAA RATING
BLOCKING OPTION
CH LOCK
VIDEO LOCK OFF
FRONT PANEL LOCK OFF
NEW PIN CODE
Continue to set each item following the steps on the following pages.
Changing the PIN code
1. From tile LOCKS menu, select
NEW PIN CODE.
2. Press the Number buttons (0-9)
to enter a new 4-digit PIN code.
The numbers you enter will
replace the dashes in the display.
3. Press ENTER. The new PIN
code is now active.
@@@®@@
LOCKS
V-CHIP
ENABLE BLOCKING ON
TV RATING
MPAA RATING
BLOCKING OPTION
CH LOCK
VIDEO LOCK VIDEO