Appendix 2 Dip Switches - TEC CB-426-T3 Owner's Manual

Appendix 2 DIP Switches

CAUTION!
Please turn off the printer
when changing the DIP switch
settings, as this may cause an
electric shock.
Appendix 2 describes functions of the DIP switches. The DIP switches
are used to change a printer specification.
To enable a new specification, please turn the printer off and then on.
The DIP switches A and B are located on the rear of the printer, as
illustrated below.
DIP Switch A
Appendix 2 DIP Switches
DIP Switch B
79