TO ADJUST THE STITCH LENGTH
Correct setting:
The actual stitch length should be 2.8 to 3.0 mm when the stitch length dial is set at "3" and
differential feed dial at "1.0 ".
To adjust:
1. Set the stitch length dial at "3 " and the differential feed dial at "1.0 ".
2. Remove the front cover unit.
3. lf the actual stitch length is longer than 3.0 mm, turn the adjusting screw in the direction A.
If the actual stitch length is shorter than 2.8 mm, turn the adjusting screw in the direction B.
4. Attach the front cover unit.
Looper thread guide
Stich length dial "3"
Direction B
Direction A
Diffrential feed dial "1.0"
26