Table of Contents
Advertisement
2. MAJOR UNIT REPLACEMENT
NOTE: Make sure to remove any dust that appears during removal or installation because it may affect
the print quality.
4) Replace the solenoid and attach it to the solenoid attaching plate.
5) Assemble the solenoid unit so that the head up link engages the spring pin.
Head Up Link
CAUTION:
Take care to orient the screws so that they are vertically aligned with the solenoid attaching plate.
6) Reassemble in the reverse order of removal.
Spring Pin
2-7
EM18-33010A
2.5 REPLACING THE SOLENOID
Solenoid
Fig. 2-12
Advertisement
Chapters
Table of Contents
