Menu And Function Buttons - Baofeng UV-5RV2+ Operating Manual

The numeric buttons have their secondary function printed on them the
secondary functions, scan and keypad lock respectively.
Pound Button
In channel mode, the [POUND] button also acts as a transmit power shortcut button. While in channel
mode, press [POUND] to change between high and low transmit power. Please note that the transmit
power stored to memory for that channel is not altered permanently, it affects only the current session.
Switching to another channel or another operating mode will reset transmit power to the setting stored
in the channel's memory.
Keypad Lock
The device includes a keypad lock feature that locks out all button except for the three on the side of the
radio. To enable or disable the keypad lock, press and hold the [POUND] button for about two seconds.
Automatic keypad locking can also be enabled through the menu so that the radio automatically locks
the keypad after ten seconds.
Star Button
A quick press of the [STAR] button enables the reverse function. When listening to broadcast FM, a
momentary press will start the scanning function. Scanning in broadcast FM will stop as soon as an
active station is found. To enable the scanner, press and hold the [STAR] button for two seconds.

Menu and Function Buttons

The [Menu] button is used to access the main menu of the device. This button is also used to confirm set
menu options by the user.
and
The buttons are used to navigate through the menu items, as well as to select channels,
and to step up and down in frequency (depending on operating modes).
The [EXIT] button is used to exit menus and cancel menu options.
Accessory Jack
The accessory jack on the device is a Kenwood compatible two pin design:
The Kenwood 2 pin connector has one 3.5mm TRS plug, one 2.5mm TS plug, with 12mm of space
between. To attach accessories such as headsets, speakers, microphones, or USB PC cables, align the
http://baofengradio.us
and
also have
14