Setting Up The Monitor; Attaching The Stand - Dell SE1918HV User Manual

Setting Up the Monitor

Attaching the Stand

NOTE: The stand base is detached when the monitor is shipped from
the factory.
1. Assemble the stand riser to stand base.
a. Place the monitor stand base on a stable table top.
b. Slide the monitor stand body in the correct direction down onto the stand base
until it clicks into place.
2. Attach the stand assembly to the monitor:
a. Place the monitor on a soft cloth or cushion near the edge of desk.
b. Align the stand assembly bracket to the monitor groove.
c. Insert the bracket towards monitor until it locks in place.
Setting Up the Monitor │ 19