Keyboard; Cpu - Toshiba M30 User Manual

User's Manual
Network Boot Protocol
This feature sets the protocol to remotely boot from the network when Wake-up on
LAN is enabled.
[PXE]
[RPL]
NOTE: The Wake-up on LAN function consumes power even when the
system is off. Leave the universal AC adaptor connected while using this
feature.

Keyboard

Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in standby mode.
Enabled
Disabled

CPU

This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically Switchable
Always High
Always Low
7-4
Sets PXE as the protocol. (Default)
Sets RPL as the protocol.
Enables the Wake-up on Keyboard.
Disables the Wake-up on Keyboard. (Default)
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation
is automatically switched when necessary.
(Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption
and low speed.