Connecting The Vcr Or Set Top Box To The Computer - Toshiba Satellite 5205 Series Setup Manual

4
How to Set Up Your Computer to Use the Media Center
with a TV Tuner
2 Connect the IR remote sensor cable 3.5 mm
connector to the port on the IR receiver.
Sample IR receiver with cables attached
3 Position the end of the IR receiver cable over the
remote IR receiver window on your cable TV set-top
box or VCR.
4 Peel off the adhesive backing on the IR remote
sensor and mount the sensor within 5 inches of the
set top box or VCR.
5 Install batteries in the Windows Media Center
remote control.

Connecting the VCR or Set Top Box to the Computer

Connect the AV composite cable from the VCR or Set
top box to the AV composite port on the right side of the
computer; or connect a coaxial cable from the VCR or
Set top box to the TV-IN on the right side of the
computer.
For information on configuring the Media
Center and the Remote Sensor, refer to your
Electronic User's Guide.
For information on configuring the Media
Center and the Remote Sensor, refer to your
User Guide.