Connecting The External Remote Sensor; Series Computer - Toshiba Satellite 5205 Series Setup Manual

How to Set Up Your Computer to Use the Media Center
Existing setup
Wall
Cable
Coaxial
cable
Set-top box/
satellite In
Set-top box/
satellite Out
Coaxial
cable
VCR In
VCR Out
Coaxial
cable
TV In
Sample wall to VCR to TV setup for the Satellite 5205

Series computer

Connecting the External Remote Sensor

The external IR remote sensor is a small device that
connects to the computer and allows the remote control to
work with the Media Center programs.
If you have a cable TV set-top box, satellite, or other
set-top box that controls your TV signal, connect the
remote sensor control cable to the remote sensor and
position the end of it over the remote receiver on your
cable box.
1 Connect the IR receiver cable USB connector to an
available USB port on your computer.
Add the notebook with a splitter
Wall
Cable
Set-top box/
satellite In
Set-top box/
satellite Out
Splitter In
Splitter Out
Coaxial cable
VCR In
VCR Out
Composite port cable
TV In
with a TV Tuner
Remote sensor
control cable
Remote
sensor
Composite port cable
3
IR receiver
A/V composite port
coaxial port
TV IN