Installing A Memory Module - Toshiba Satellite Pro 6000 Series User Manual

Installing a memory module

Additional memory modules can be installed in the memory
expansion slots on the base of the computer. You will need a
standard Phillips no.1 screwdriver for this procedure.
CAUTION: To avoid damaging the computer's screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Installing a memory module with the computer's
power on may damage the computer, the module, or both.
The computer has two memory expansion slots—Slot A and
Slot B. You can install one or two memory modules.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1 If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the computer.
4 Remove the battery.
5 Close the display panel and turn the computer upside down to
locate the expansion memory slot cover to the memory slot.
Getting Started
Adding memory
55