Table of Contents
Advertisement
26
Setting up your computer and getting started
Your computer comes with enough memory to run most of
today's popular applications. You may want to increase the
computer's memory if you use complex software or process
large amounts of data.
Additional memory comes in various sized modules. You can
install a maximum of two modules in your computer's
expansion memory slots, located on the bottom of your
computer.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
The computer has two memory expansion slots—Slot A and
Slot B. You can install one or two memory modules.
1
Shut down your computer completely using the Shut
Down command.
2
Unplug the computer.
3
Close the display panel and remove any cables you may
have connected.
4
Turn the computer upside down.
5
Locate and remove the screws that hold the cover plate in
place, and lift the cover off of the memory module bay.
Removing the memory module cover
To avoid damaging the computer's screws, use a standard Phillips
no. 1 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
Advertisement
Table of Contents
