Toshiba Satellite M20 Resource Manual page 25

Toshiba modem resource guide
Hide thumbs Also See for Satellite M20:
Table of Contents

Advertisement

Power Cable and AC Adapter
Connecting a printer
Before you can connect a printer, you need to know whether
it uses a serial or a parallel interface. Check the printer's
documentation. If the printer can be switched between serial
and parallel mode, choose parallel because it is faster.
You also need a suitable printer cable, which may come with
your printer. Otherwise, you can purchase one from a
computer or electronics store.
Installing additional memory (optional)
Setting up your computer and getting started
When you connect the AC adapter to the computer, always follow the
steps in the exact order as described in the User's Manual.
Connecting the power cable to a live electrical outlet should be the
last step; otherwise, the adapter DC output plug could hold an
electrical charge and cause an electrical shock or minor bodily injury
when touched. As a general safety precaution, avoid touching any
metal parts.
Power cable
Hold the power cable by its plug when you connect/disconnect it. Do
NOT pull the cable itself. Doing so may damage the power cable and
result in a short circuit or electric shock.
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
If your printer is ECP- or IEEE-compliant, make sure your printer
cable is an IEEE 1284 cable.
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or Hibernation mode, data will be
lost.
AC adapter
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite m20 seriesSatellite p25 series

Table of Contents