Toshiba VF-A7 Instruction Manual page 46

Ethernet communications interface for the toshiba 7 series and 9 series adjustable speed drives

Hide thumbs Also See for VF-A7:

Table of Contents

Note: It is possible that certain computers may have difficulty communicating at a

sustained 115kbaud rate, which may result in communication errors during firmware

downloading. If this occurs, try setting the "baud rate" parameter shown in Figure 19

to a lower value.

Figure 19: Communications Options Window

Next, select the "Setup...Boot Strap Loaders" menu item. The "Choose Loaders"

window shown in Figure 20 then appears. Confirm that the correct paths to the

COLDLOAD.BIN and PILOT.BIN files are entered. Enter the correct paths if

necessary.

Figure 20: Boot Strap Loaders Window

Table of Contents

Eth-100