Advertisement
Q.) How do I set up multi-point pairing? How do I change active devices?
A.) Multi-point pairing, a feature of Bluetooth 4, is set up automatically—pair a second device
(power cycle by holding the power button down until the earphones turn off, and press again for
7 seconds to enter pairing mode). The playback between devices should be triggered by new
activity (incoming call, new playback). If devices do not automatically recognize the BT1 as an
output device, manually disconnect and re-select the BT1 in device settings.
Q.) Are my wireless Sound Isolating earphones designed for calls?
A.) The Bluetooth 4 protocol has both headset and stereo audio playback features built-in. The
two-way audio and remote functions are included in that protocol, and the inline microphone
located on the right side cable is provided for calls and voice commands.
Q.) Does the cable work with my iPhone/iPod/iPad/Android device?
A.) Any device supporting Bluetooth 4 stereo audio playback and telephony protocols is
compatible, including Apple and many Android devices. We recommend downloading and
installing the latest compatible operating system to ensure all drivers are up-to-date.
®
®
Q.) Do my wireless Sound Isolating earphones work with Siri
or Google
?
A.) Yes, hold the center button on the remote for 3 seconds to activate Siri, Google, or any other
voice assistant service. (Source device dependent.)
Q.) How do I use voice commands?
A.) Hold down the multi-function center button (power/answer/end call) for 3 seconds to
prompt voice command software. (Source device dependent)
Q.) What device controls do the cable and earphones support? How do I use them?
A.) The center button may be used for play, pause of media, and answering and ending of calls.
Volume up (+) button can be depressed for 3 seconds to skip forward to the next song. The
volume down (-) button can similarly be depressed for 3 seconds to skip to the beginning of the
song (or to a previous song within approximately 5 seconds of the beginning of a track).
The center button will power down the earphones when held for 5 seconds. Holding down the
power button for three seconds also powers the device back on.
Q.) Will my wireless Sound Isolating earphones work with fitness apps?
A.) Yes, most apps that have audio prompts will work, just like wired earphones.
Note: These earphones will not provide heart rate or other biometrics.
Battery, Durability, Range and Charging
Advertisement
