Advertisement
1. Turn off the earphones. Press and hold center button on earphone remote until the LED
flashes blue and red.
2. From your audio source, select "Shure BT1."
3. LED turns blue when successfully paired.
Pairing Multiple Bluetooth Devices
1. Turn off the earphones. Press and hold center button on earphone remote until the LED
flashes blue and red.
2. From your audio source, select "Shure BT1."
3. LED turns blue when successfully paired.
To pair second device:
1. Press and hold the center button on the second device until the LED flashes blue and red.
2. Select the second device on your audio source.
3. LED turns blue on second device when successfully paired.
Pairing Bluetooth Device to a PC
If you are having difficulty pairing your BT1 earphones to your PC, you may need to update
your drivers. Here are two ways to update your computer driver via the Intel
1. Manually: This requires that you locate your wireless adapter and then download the
specific driver update for that wireless adapter
2. Intel Update Utility: This requires you to download the update app, run the app and
allow it to scan your computer for required driver updates.
3. Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to
your PC user manual for more information.
Using the Bluetooth Remote
The Center Button
Power on
Power off
Bluetooth pair
Play/Pause
Answer/End a call
Decline a call
Activate voice assistant
Press and hold
Press and hold, 5 seconds
Press and hold, 10 seconds
Click once
Click once
Press and hold, 3 seconds
Phone on, press and hold, 3 seconds
®
website.
Advertisement
