Advertisement
Quick Links
Instructions for Toshiba G9 ETB006Z option card
Terminal Assignment
Instructions:
1.- Disconnect the ST to CC jumper on the standard terminal strip.
2.- Connect the ETB006Z card to the ASD as follow.
3.- Set jumper J100 to Source position.
4. – Provide 120V to the terminals of the ETB006Z card by using N as a neutral.
5.- Remember to provide 120V to AC7 since correspond to ST.
ETB006Z
G9
AC1
F
AC2
R
AC3
S1
AC4
S2
AC5
S3
AC6
RES
AC7
ST
Advertisement
