Toshiba Eagle T1 Series PLCs Installation Manual

In Touch With Tomorrow
Programmable Controllers

PRODUCT INFORMATION

More Analog Inputs for T1 PLCs
Eagle 0800
8 Analog
Inputs
Toshiba Houston offers the Eagle analog I/O for the T1 Series PLCs. The Eagle I/O is universal
analog I/O. Eagle I/O allows T1 PLCs to work with the following analog signals.
Thermocouples
RTDs
0-50 mV
For the analog inputs, the Eagle I/O performs the A to D (analog to digital) conversion and loads a
digital value directly into a T1 register. For analog outputs, the Eagle I/O reads a digital value out
of a T1 register and performs a D to A (digital to analog conversion).
PLC registers are defined using the included simple setup software.
Simple process control has never been easier or more cost effective. Now the analog values
of temperature, pressure, flow, weight, etc. can be included into the sequencing, interlocking and
permissive control performed by the PLC.
For more information contact your nearest Toshiba programmable controller distributor, or visit the Toshiba Houston
Industrial website, www.tic.toshiba.com.
Also
Available
Analog Inputs
0-20 mA
4-20 mA
0-100 mV
TOSHIBA INTERNATIONAL CORPORATION
PH. 800 231- 1412, 713-466-0277
Eagle 0201
2 Analog Inputs
1 Analog Output
13131 West Little York Road
Houston, TX 77041
FAX 713-466-8773
E- Mail plc@tic.toshiba.com
October 2002
Eagle 0404
4 Analog Inputs
4 Analog Output
Analog Outputs
4-20 mA
0-100 mV
0-10 Vdc
Analog signal types and