Zooming; Locating Desired Scene - Toshiba SD-V291 Owner's Manual

Advanced playback (DVD)
Zooming/Locating desired scene

Zooming

DVD
VCD
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
CM SKIP
The centre part of the image will be
ZOOM
zoomed in.
Each press of ZOOM will change the
ZOOM
(x 2.0).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press DISPLAY.
1
Press JUMP during playback or stop mode.
ZERO RETURN
JUMP
2
Press or
"Chapter".
SET +
CH – CH +
ENTER
SET –
Note:
In case of the Video-CD playback with PBC, the JUMP does not work.
50
1 (x 1.3), 2 (x 1.5) and
1
to select the "Time", "Title" or
2
Press / /
frame.
SET +
You may move the frame from the
centre position to UP, DOWN, LEFT or
CH – CH +
ENTER
RIGHT direction.
3
SET –
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
CM SKIP
ZOOM
3
Press Numbered buttons (0-9) to change the
number.
• If you input a wrong number, press
1 2 3
4 5 6
• Refer to the package supplied with
7 9 0
8
4
Press ENTER. Playback starts.
• When you change the title,
SET +
CH – CH +
ENTER
• Some discs may not work in the
SET –
DISPLAY
0–9
/ / /
JUMP
ZOOM
ENTER
CANCEL
/ to view a different part of the
Off).
CANCEL.
the disc to check the numbers.
playback starts from Chapter 1
of the selected title.
above operation.