Advanced Playback (Dvd); Zooming; Locating Desired Scene; Marking Desired Scenes - Toshiba SD-V393SU Service Manual

Basic playback (DVD)
Playing a disc (Continued)
You can play discs at various speeds.
DVD
Playing in fast reverse or fast forward directions
VCD
CD
Press REW or FF during playback.
REW: Fast reverse playback
FF: Fast forward playback
Each time you press REW or FF, the
playback speed changes.
Playing frame by frame
DVD
VCD
Press PAUSE/STEP during still playback.
Each time you press PAUSE/STEP,
the picture advances one frame.
DVD Playing in slow-motion
VCD
Press SLOW ( ) during playback.
Each time you press the button, the
slow-motion speed changes.
DVD
Locating a chapter or track
VCD
CD
Press SKIP or repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Notes:
• A "Prohibition" symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/
VCR.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
44

Advanced playback (DVD)

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
DVD Marking the scenes
VCD
1 Press MARKER during playback.
arker 1
arker 2
arker 3
/Enter/Clear/ arker
Select the blank Marker using C or D.
2
Then press ENTER at the desired scene.
• Repeat this procedure to set the
other 2 scenes.
arker 1 00 27 54
arker 2
arker 3
/Enter/Clear/ arker
3 Press MARKER to remove this display.
Notes:
•
Some discs may not work with the marking operation.
•
The marking is canceled when you open the disc tray or turn
the power off.
•
Some subtitles recorded around the marker may fail to
appear.
46
SLOW
PAUSE/STEP
PLAY
FF
REW
SKIP
/
To resume normal playback
Press PLAY.
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD/VCD video discs. However, this
unit plays sound during fast forward or fast reverse play of
audio CDs.
• The playback speed may differ depending on the disc.
To resume normal playback
Press PLAY.
Note:
The sound is muted during frame by frame playback.
To resume normal playback
Press PLAY.
Note:
The sound is muted during slow-motion playback.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
C/D
ENTER
CLEAR
MARKER
DVD Returning to the scenes
VCD
1
Press MARKER during playback or stop mode.
arker 1 00 27 54
arker 2 01 16 25
arker 3 02
08 31
/Enter/Clear/ arker
Press C or D to select the Marker 1-3.
2
arker 1 00 27 54
arker 2 01 16 25
arker 3 02
08 31
/Enter/Clear/ arker
3 Press ENTER.
Playback starts from the marked
scene.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Advanced playback (DVD)
Zooming/Locating desired scene
DVD

Zooming

VCD
CD
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
1 Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
1
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to play back.
1 Press SEARCH during playback or stop mode.
ime /
itle /6
Chapter
/
/Enter/0 9/Clear/Search
• "Time" only works in playback
or resume stop mode.
Press C C C C C or D D D D D to select the "Time", "Title" or
2
"Chapter".
ime /
itle /6
Chapter
/
/Enter/0 9/Clear/Search
Note:
In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC
Repeat playback/A-B Repeat playback
DVD

Repeat playback

VCD
CD
1 Press PLAY MODE during playback or stop mode.
[DVD]
2
Press B B B B B /A A A A A to select "Chapter" or "Title".
Repeat Off
/Play Mode
The unit automatically starts repeat
playback after finishing the current ti-
tle or chapter.
[Audio CD, Video CD, MP3/WMA CD]
Press D D D D D to select "Repeat".
Press B B B B B /A A A A A to select "Track" or "All".
Play Mode Off
Repeat Off
/Play Mode
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3 Press PLAY MODE again to make the screen
disappear.
To resume normal playback
Select Repeat : "Off" in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohib-
ited during playback.
ZOOM
C/D/B/A
ENTER
CLEAR
DISPLAY
0–9
SEARCH
Press C C C C C /D D D D D /B B B B B /A A A A A to view a different part of the
2
frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
3 In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
To check the title, chapter and time, press DISPLAY.
Press Number buttons (0–9) to change the
3
number.
ime /
itle /6
Chapter 12
/
/Enter/0 9/Clear/Search
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
51 .
45
D/B/A
PLAY
A-B RPT
PLAY MODE
DVD

A-B Repeat playback

VCD
CD
A-B repeat playback allows you to repeat material between
two selected points.
1 Press A-B RPT during playback.
The start point is selected.
A
2 Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
A B
To resume normal playback
Press A-B RPT again.
" Off " appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
47