Carrier AquaSnap 30RB Series Installation, Operation And Maintenance Instructions page 46

30RB 602-802
Control power connection,
Control power user connection
legend:
all dimensions are in mm.
Clearances required for maintenance and air flow
Clearances recommended for evaporator tube removal
Clearances recommended for heat exchanger removal
Water inlet, evaporator and desuperheater
Water outlet, evaporator and desuperheater
Air outlet, do not obstruct
Control box
Additional compressor(s), depending on the unit size
46
circuits A and B
Control power
connection, circuit C
30RB X Y
602-672 5992 1200
732-802 7186 1869
NOTE: Non-contractual drawings.
When designing an installation, refer to the certified
dimensional drawings, available on request.
for the positioning of the fixing points, weight
distribution and centre of gravity coordinates.
ø 2" Cylindrical gas thread,
desuperheater-side