Carrier AquaSnap 30RB Series Installation, Operation And Maintenance Instructions page 40

30RB 302-402 - total heat reclaim condenser option
3" Victaulic type 75
4" Victaulic type 75
4" Victaulic type 75
3" Victaulic type 75
legend:
all dimensions are in mm.
Clearances required for maintenance and air flow
Clearances recommended for evaporator tube removal
Clearances recommended for heat exchanger removal
Water inlet
Water outlet
Air outlet, do not obstruct
Control box
40
Power connection
NOTE: Non-contractual drawings.
When designing an installation, refer to the certified
dimensional drawings, available on request.
for the positioning of the fixing points, weight distribu-
tion and centre of gravity coordinates.
ATTENTION: The Victaulic flange sleeves of the condenser
are factory-installed.
For user control connection
Sizes 372 and 402