Table of Contents
Advertisement
Brought to You by Augusta Flint
1.
To prevent oxidation, periodically open Transformer Jaws and wipe the
magnetic pole pieces with a lightly oiled cloth.
2.
Wipe unit with a slightly damp cloth using a light detergent. Do not use
solvents or abrasives.
3.
Remove battery if not in use for long periods.
4.
Store unit in the carrying case and place in a dry location.
5.
Other than the battery, there are no replaceable parts on this unit. Repairs
should be done by a qualified technician.
•
Household uses – Verify and measure current flow and voltage to such
appliances as electric water heaters, fan motors, generators, and pumps.
Measure excessive current flow on circuits in distribution panels which are
tripping circuit breakers. Check for wire continuity or resistance using the
Test Leads and Ohms function.
•
Distribution transformers – Measure load on each phase for balance and
for excessive current draw.
•
Motors – Measure starting current, running current, and current imbalance
between phases.
•
Variable speed motor controllers – Measure input and output currents.
1.
Remove the Test Leads from the multimeter.
2.
Turn the unit over.
3.
Remove back cover.
4.
Pull battery out of unit and replace.
5.
Replace cover.
NOtE: No internal replacement parts are available for this tool.
SKU 42396/95652
Maintenance
Measurement applications
battery Replacement
For technical questions, please call 1-800-444-3353.
Page 7
Hide quick links:
Advertisement
Table of Contents
