Table of Contents
Advertisement
Brought to You by Augusta Flint
You will need the manual for the safety warnings and
precautions, and operating and maintenance procedures.
Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep the manual and invoice
in a safe and dry place for future reference.
Safety Warnings and Precautions
WaRNiNg: When using tool, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before using this tester!
test cable voltages with care. Only use one hand when securing the
1.
tester around the cable to reduce risk of injury in case of electric shock.
2.
avoid working alone. If an accident happens, an assistant can bring
help.
3.
Keep work area clean. Cluttered areas invite injuries.
4.
avoid electrical shock. Use extreme caution when clamping around
uninsulated conductors or bus bars. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and cabinet enclosures when
testing voltages.
avoid damaging meter. Use only as specified in this manual.
5.
6.
Observe work area conditions. Do not test voltages in damp or wet
locations. Don't expose to rain. Keep work area well lit.
7.
Keep children away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords.
8.
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
9.
Dress properly. Protective, electrically nonconductive clothes and
nonskid footwear are recommended when working.
10.
Use eye protection. Always wear ANSI approved impact safety goggles.
11.
Do not overreach. Keep proper footing and balance at all times. Do
not reach over or across electrical cables or frames.
12.
Maintain tools with care. Ensure multimeter has a fresh battery.
Inspect tool cords periodically and, if damaged, have them repaired by
an authorized technician.
Stay alert. Watch what you are doing, use common sense. Do not
13.
operate any tool when you are tired.
SKU 42396/95652
Save this Manual
For technical questions, please call 1-800-444-3353.
Page 3
Hide quick links:
Advertisement
Table of Contents
