Toshiba Qosmio G35 User Manual page 69

2 Connect the three RCA jacks on the other end of the
cable to your digital television. Refer to the manual that
came with the television for more information.
3 Turn on your computer.
4 While holding down
between each press, until you get the desired setting. For
more information, see
you turn on the computer" on page
Connecting the sound to a TV or stereo system
At times you may prefer to use external audio instead of the
computer's built-in speakers. For example, when you use a
TV or other external display device you can use that device's
speakers, or when you use the computer's built-in display you
can connect to external speakers or a stereo sound system for
higher quality sound.
You can connect the sound to external audio devices in two
ways:
❖
Using the headphone jack on the left side of the
computer. This lets you connect directly to headphones,
powered speakers, or a stereo system that supports input
from a headphone output. You need a cable (not shipped
with your computer) with a 1/8" (3.5mm) stereo plug on
one end and a plug compatible with your sound system
on the other end (typically an RCA type connector).
❖
Using the S/PDIF jack on the left side of the computer.
This lets you connect to a sound system that can accept
the digital optical signal from your computer. You need
an S/PDIF cable (not shipped with your computer) with a
Toslink 1/8" (3.5mm) mini plug on one end and a plug
compatible with your sound system on the other end.
Connecting external display devices
, press
Fn
"Directing the display output when
Getting Started
repeatedly, pausing
F5
72.
69