Toshiba Portégé M200 User Manual page 156

User's Manual
3. Close the display panel and turn the computer over. Remove the Battery Pack.
4. Loosen a screw on the cover of the memory module slot.
Figure 8-5 Removing the memory module cover
5. Insert the memory module obliquely against the connector of the memory
module slot. Gently push the memory module until it is secured in place.
NOTES: 1. The memory module slot consists of two sub slots
(connectors): Slot A (lower slot) and Slot B (upper slot).
2. Align the grooves of the memory module with the locking
tabs of the connector and insert the module into the
connector firmly. If you find it difficult to install the memory
module, try to adjust the tabs of the connector with a pen tip
or other tools. Make sure to hold the memory module with
your fingers on the side edges (sides with grooves).
8-8
S A
S B
LOT
LOT
Figure 8-6 Installing a module