Changing The Window Wiper Blades - SMART EQ forfour 2018 Owner's Manual

caps from the relevant wheels before fit-
ting the snow chains.
For safety reasons, smart recommends that
you only use snow chains that have been
specially approved for your vehicle by
smart. Further information can be obtained
at a smart Centre or a qualified specialist
workshop.
X
Observe country-specific regulations.
X
Use only snow chains approved for smart.
X
Fit snow chains on both rear wheels.
X
Use snow chains only on snow-covered
roads.
X
When driving with snow chains fitted, do
not exceed the maximum permissible
speed of 50 km/h.

Changing the window wiper blades

Please note
G
WARNING
If the windscreen wipers begin to move
while you are changing the wiper blades,
you can be trapped by the wiper arm.
There is a risk of injury.
Always switch off the windscreen wipers
and ignition before changing the wiper
blades.
!
Never open the service cover or tailgate
if a wiper arm has been folded away from
the windscreen or rear window. Never
fold a wiper arm without a wiper blade
back onto the windscreen or rear window.
Hold the wiper arm firmly when you
change the wiper blade. If you release the
wiper arm without a wiper blade and it
falls onto the window, the window may be
damaged by the force of the impact.
Changing the window wiper blades
Changing the window wiper blades on
the windscreen
X
Fold the wiper arm away from the wind-
screen.
X
Release tab ; of bracket ? must be
pressed towards windscreen 3. The
catch tab is released from the bracket
and the wiper blade can be pulled away
from the wiper arm.
X
Slide window wiper blade : in the direc-
tion of arrow 5 until the securing hook
for the window wiper blade is revealed.
X
Remove the window wiper blade.
X
Slide new window wiper blade : in the
direction of arrow 4 onto mounting =
of wiper arm ;.
The window wiper blade snaps into place.
X
Check that the window wiper blade is
positioned correctly.
X
Carefully fold wiper arm ; onto the
windscreen.
169
Z