Using The Navigation System - SMART EQ forfour 2018 Owner's Manual

Table of Contents

Advertisement

Using the navigation system

140
Using the navigation system
Starting the navigation system
Please note
G
WARNING
If you operate information and communi-
cation equipment integrated in the vehi-
cle when driving, you could be distracted
from the traffic situation. This could also
cause you to lose control of the vehicle.
There is a risk of an accident.
Only operate this equipment when the
traffic situation permits. If you cannot be
sure of this, stop the vehicle paying
attention to road and traffic conditions
and operate the equipment with the vehi-
cle stationary.
The navigation system does not provide
information on stop signs, right of way
signs, traffic regulations or road safety
regulations.
The traffic regulations always take prece-
dence over navigation announcements.
Observe the legal stipulations and traffic
regulations of the country you are driving
in when in navigation mode.
Selecting the navigation system
X
Menu
> Navigation.
Select
The following navigation settings can be
selected:
searching for a destination
R
planning a route
R
displaying a map
R
calling up TomTom Services
R
changing navigation settings
R
Installing map data
G
WARNING
SD cards are small parts. They can be
swallowed and cause choking. This poses
an increased risk of injury or even fatal
injury.
Keep the SD card out of the reach of chil-
dren. If a SD card is swallowed, seek med-
ical attention immediately.
!
To prevent damaging data, only use the
supplied SD card for Media-System data
or to update map and system files.
X
Insert an SD card into the SD card slot in
the centre console.
X
Switch on the device.
The map data is read by the navigation
system.
Removing an SD card
X
Menu
System
Select
>
X
Confirm the display message with Yes.
X
Press the SD card.
X
Remove the SD card from the slot.
Updating map data
Regular updates will be offered for the map
data. The first update can be downloaded
for free in the web portal within 90 days of
vehicle activation. This requires registra-
tion at http://tomtom.com/forsmart. Further
information is available from any smart
Centre.
X
Remove the SD card from the vehicle and
insert it into a computer.
X
Install update software on the computer.
X
Run the map update assistant.
i
As well as updates, the latest software
for the Media-System can be downloaded
and Premium Voices by TomTom can be
purchased.
Entering and managing destinations
Entering a destination by address
X
When using the navigation system for
the first time, enter the country.
X
Navigation
Select
Address.
X
If desired, change the country using the
flag symbol.
X
Enter the town or postcode.
Remove SD
card.
>
Drive to...
>
>

Advertisement

Table of Contents
loading

Table of Contents