Gaggia 10002842 Operation And Maintenance Manual page 27

4
Apply the grease evenly on both
side guides.
7
The lever on the rear part of the
group must be in contact with
the Brew Group base.
5
Make sure the group is in rest
position; the two references must
match.
8
Insert the washed and dried Brew
Group.
DO NOT PRESS THE "PUSH"
BUTTON.
6
Make sure the components are in
the correct position.
The hook shown must be in the
correct position; to check its
position, fi rmly press the "PUSH"
button.
9
Insert the grounds drawer and
close the service door.
27