Alcatel ONE TOUCH 7053 Repair Document page 8

L2 Repair Document

VIBRATOR
I. You can feel the phone‟s vibrating if it functions well.
II. Press "Pass" to continue.

ACCESSORY
Insert earphone to test, if it functions well press "Pass" to continue.

CHARGE
Insert USB to charge, show „charge ok‟ press "Pass" to continue.

USB
I. Insert USB cable and the phone will detect "Charger: OK" "USB: OK" if it functions well.
II. Remove USB cable according to the instruction and then press "Pass" to continue.

USB OTG
I. Insert USB OTG device and the phone will detect "OTG: OK" if it functions well.
II. Remove USB OTG device according to the instruction and then press "Pass" to continue.

COMPASS
Show compass data press "Pass" to continue.

G-SENSOR
I. Screen will display "put the handset up and towards up", follow this prompt screen will
display left arrow, right arrow, up arrow, down arrow and face down arrow. Put the
phone to the positions according to the arrows‟ direction. It will say "all positions
checked" if functions well.
II. Press "Pass" to continue.

LIGHT SENSOR/PROXIMITY
I. It will say "Proximity Sensor detected", put the phone near your skin and then move away
from your skin. values such as "near->far:2" will be shown if functions well;
II. Press "Pass" to continue.

GYROSCOPE
Please rotate cube, press "Pass" to continue if functions well .

SIM
I. Insert the SIM card and the phone will detect it if it functions well.
Rev.
1.1
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
ALCATEL ONE TOUCH 7053 Level 2 Repair Document
TCT
Mobile Limited
Page
8/44