Rack Is Installed - HP ProLiant DL360p G8 Manual

By avaya
Hide thumbs Also See for ProLiant DL360p G8:
Table of Contents

Advertisement

contains the step-by-step procedures. Where applicable, additional information and clarifications
appear in the Avaya recommendation column. Perform each task in the order specified.
Note:
Avaya customers are required to have a monitor and USB keyboard available for server
maintenance.
No.
Task
1
Observe safety
warnings
2
Examine contents
of shipping
container (Avaya
provided
equipment)
3
Examine
installation
environment
(customer
provided
equipment)
4
Verify that the

rack is installed

according to the
manufacturer's
instructions and
in accordance
with all local
codes and laws
5
Verify that the
rack is grounded
in accordance
with local
electrical code
6
Determine and
plan the vertical
spacing of the
servers in the
frame
7
Attach the rails to
the rack.
September 2013
Reference
Avaya recommendation
User Guide:
Installing the
server into the
rack.
User Guide:
• Server
Contents of the
• Power extender cord
server shipping
• Printed setup documentation
carton
• Rack mounting hardware kit and documentation
User Guide:
When installing the server in a rack, select a location that
Optimum
meets the environmental standards.
Environment
User Guide:
To install the server into a rack with square, round, or
Installing the
threaded holes, refer to the instructions that ship with the
server into the
rack hardware kit.
rack
User Guide:
The server must be grounded for proper operation and
Electrical
safety.
Grounding
Requirements
User Guide:
Servers draw in cool air through the front and expel warm air
Space and
through the rear. Therefore, the front rack doors must be
Airflow
adequately ventilated to allow ambient room air to enter the
Requirements
cabinet, and the rear door must be adequately ventilated to
allow the warm air to escape from the cabinet.
User Guide:
To install the server into a rack with square, round, or
Installing the
threaded holes, refer to the instructions that ship with the
server into the
rack hardware kit. If these rails do not fit the rack the
rack
customer must provide rails or a shelf for rack installation.
Also the rails included with the server might not work with
Comments on this document? infodev@avaya.com
Installing the server in the rack
Installing the HP ProLiant DL360p G8 Server
Table continues...
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents