HP ProLiant DL360p G8 Manual page 14

Installing the HP DL360p G8 Server
No. Task
8 Attach the server
to the rack
9 Connect the
peripheral
devices to the
server
10 Power up the
server.
Installing the HP ProLiant DL360p G8 Server
14
Reference Avaya recommendation
round hole racks, in which case the customer can obtain rails
and/or a shelf from a distributor. (RackSolutions.com)
User Guide:
Warning:
Installing the
This server is very heavy. To reduce the risk of personal
server into the
injury or damage to the equipment:
rack
• Get help lifting and stabilizing the product during
• Use caution when installing the server in or removing
Server Setup Network connections, power cords, cable management arm
Poster: (not included)
Connecting the
Consult your Avaya application installation documentation at
power cord to the
this point.
power supply
User Guide: Once powered up refer to Avaya application installation
Powering up and instructions
configuring the
server
Comments on this document? infodev@avaya.com
installation or removal, especially when the product is
not fastened to the rails. HP recommends that a
minimum of two people are required for all rack server
installations. A third person may be required to help
align the server if the server is installed higher than
chest level.
the server from the rack; it is unstable when not
fastened to the rails.
September 2013