Saeco 740814352 Operating Instructions Manual page 24

24 INSTALLATION / VENTILATE
Fill the coffee bean container
with coffee beans.
Place a container beneath
the steam tube.
Turn the knob clockwise
to terminate the circuit-
loading process.
Fill the tank with fresh drin-
king water.
RINSING
WARMING UP ...
Press the button to Now this message will also
dispense water be displayed
Remove the container.
Press the button again.
See rating plate
Insert the plug into a sui-
Move the ON/OFF switch
table electric socket. to "I" to turn on the
machine.
HOT WATER
WARMING UP ...
Turn the knob countercloc-
kwise to start loading the
circuit.
RINSING
WARMING UP ...
The machine is ready for
use.
RINSING
WARMING UP ...
The display will indicate
that
warming up
Wait until a steady stream
of water fl ows out from the
nozzle.
Note: You must load the circuit
before starting up the machine
for the first time, if it has been
SELECT PRODUCT
inoperative
READY FOR USE
period or if the water tank
has been completely emptied.
Moreover, the circuit must be
loaded every time the message
"VENTILATE" is displayed.
the machine is
for a lengthy