Saeco SUP 021 YDR Operating Instructions

Every 3-4 months or when
the message appears:
DESCALE
DESCALING
READY FOR USE
- It is not permitted to draw off coffee, while descaler is in the water tank.
- For descaling, the machine has to be connected to the mains and the main switch
has to be switched on.
- For the descaling use a non-toxic and/or harmless descaler, available in common trading.
- NEVER use vinegar, it could damage the machine!
- Follow closely the manufacturer's instructions!
- Should the descaling be interrupted by switching off the mains, it is absolutely necessary
to execute a complete cleaning cycle after restarting.
- During the complete descaling process the machine interrupts, automatically and at
regular intervals, the output of the descaling agent.
1
Preparation
Place a big container Fill the water tank with
under the hot water / the descaling solution as
steam nozzle. instructed by the
2 manufacturer.
Descaling
Duration: approx. 60 min.
Observe the display... ...and continue like follows:
DESCALING
Push for 3 sec.
READY FOR USE
close ...
DESCALING
Open the knob
OPEN KNOB
... the knob
MACHINE IS DESCALING
open ...
Interrupt the descaling
1.Close the knob If the descaling process is being
interrupted, we suggest, to start
MACHINE IS DESCALING
2.Push
a complete descaling cycle at
OPEN KNOB
a later date.
DESCAL. INTERRUPTED
3.Rinse and fill up
EMPTY WATERTANK
the water tank
4.Rinse machine
DESCALING FINISHED
Close the knob
CLOSE KNOB
RINSE MACHINE
Rinse the water tank and fill with 1 liter of fresh water
FILL WATERTANK
RINSE MACHINE
Push
PRESS KEY
RINSE MACHINE
Open the knob
OPEN KNOB
MACHINE IS RINSING
RINSING FINISHED
Close the knob and the descaling process is finished.
CLOSE KNOB
6
Supplied accessories
Key for brewing unit Cleaning brush
dismantling/assembly
Coffee measure Test strip for water hardness
Technical data
- Type SUP 021YDR
- Nominal voltage See name plate under the coffee machine
- Nominal output See name plate under the coffee machine
- Supply See name plate under the coffee machine
- Casing material Metal - plastic
- Dimensions (L x W x H) approx. 27,5 x 35 x 42 cm / 11 x 14 x 17"
- Weight (net) approx. 11 kg / 22 lbs
- Length supply cable 1.2 m / 1.30 yards
- Supply casing yes
- Operating panel frontal
- Water tank removable
- Water tank capacity 1.8 l / 60 oz
- Coffee bean container capacity 180 g / 60 oz beans
- Heating Aluminium
- Pump pressure 15 bar
- Safety devices Security valve pump pressure
Security thermostat
TSM SUCCESS MANUAL® - safe to use - easy to
understand due to TSM® - Total Security Management
and ergonomic communication®
This TSM SUCCESS MANUAL® has been examined by SEV for conformity with the safety-relevant standards, and has been
analysed by an application-oriented risk analysis for the completeness and correctness of the indications for a safe use of
the appliance. Thereby we assume a use with which can be reckoned based on common-sense.
7
TROUBLESHOOTING
No display
- Switch on main power switch
No power to the machine - Check plug and connection
With selection «Preground coffee»
only water comes instead of coffee
- Fill with a measuring dipper of ground coffee
Coffee is not hot enough - Activate the cup heater and put
on the cups
- Eventually clean the brewing unit,
descale
No hot water / steam
- Clean nozzle with a needle
(Attention: only proceed when machine is
switched off and tap is closed)
Hot water / steam nozzle is blocked
Heating time is too long
Not enough water
- Descale machine
1. Close service door
Brewing unit cannot be
2. Switch on machine
removed
3. Brewing unit is unlocked
4. Continue with
1.
Brewing unit cannot be
inserted
2
«Reset» brewing unit
1
2.
The output does not start
Observe the display:
ENERGY SAVING Push the «MENU/OK» button
DESCALING Descaling see respective section ; page 6
FILL WATERTANK Fill the tank with fresh water
VENTILATE Ventilate (prime) the circuit (Starting)
COFFEE BEANS EMPTY Fill coffee bean container with coffee beans
DREGDRAWER FULL Empty the dregs drawer (with the machine switched on)
BREWUNIT MISSING Correctly insert the brewing unit
DREGDRAWER MISSING Correctly insert the dregs drawer and the drip tray
CLOSE DOOR Close the service door
GRINDER BLOCKED Grinding motor is blocked
BREWUNIT BLOCKED The motor of the brewing unit is blocked
Please call an authorized service center
8
CLEANING
use only a non-abrasive cleaning agent
- During cleaning the device must not be connected to the mains.
- Do not dry any components in traditional or microwave ovens.
Casing
Wipe with a soft damp cloth
Dregs drawer
Drip tray Rinse under fresh water
- Rinse under fresh water
Water tank
- Extract the filter on the inside of the tank
and clean carefully; insert the filter by
light pressure and rotative movement
1. Extract external body by rotation and
Coffee outlet
downwards movement
Clean weekly
2. Rinse under fresh water
1. Extract external body by
Pannarello
rotation and downwards
movement
2. Remove the internal mechanism
3. Rinse all components of the nozzle
under fresh water in order to remove
milk residues
Brewing unit 1. Remove drip grid
1.1 Open service door
Clean weekly
1.2 Remove dregs drawer and
Never clean in the dishwasher
drip tray
1.1
1.
1.2
2.1 Loosen sieve with key ... 2. Press PUSH position and remove unit.
If necessary remove the upper filter
of the brewing unit
Clean all the components under
running warm water and dry carefully.
Clean service area
3. Reassemble brewing unit and
2.2 ... and remove push in.
DO NOT press PUSH position with
the brewing unit inserted.
4. Insert drip tray and dregs drawer
and close the service door
9
T Y P E S U P 0 2 1 YDR
Operating Instructions
Please read these TSM® operating instructions before operating the device. In order to
obtain drinks of good quality and to avoid damage or injury, follow the instructions
precisely. Ensure that these instructions are given to any other users of the device and
that they are kept in a safe place so that they can be referred to at any time. The device
has been conscientiously checked for safety and correct operation. It left the factory in
fault-free working order.
The enclosed «Safety Instructions» form an integral part of this user manual.
Read «Safety Instructions» prior to initial operation of the device and keep it together
with the user manual.