Station Tuning; Automatic Tuning; Manual Tuning; Selecting The Seek Tuning Sensitivity - Blaupunkt CARACAS RCR 27 Operating Instructions Manual

Station tuning

Automatic tuning

/
• Press / ; the car radio will automati-
cally search for the next station, if "m"
does not light up in the display.
If you hold down the upper or lower part
/ of the rocker switch, seek tuning will
speed up in the upwards or downwards di-
rection.
Automatic tuning
/ Up/down, if "m" does not light up in
the display

Manual tuning

/ Up/down in short intervals, if "m"
lights up in the display.
Manual tuning
Manual tuning is only possible if "m" lights
up in the display. "m" stands for manual and
can be turned on/off:
• Press lo.m several times if required.
To tune to a station manually:
• Press / - the frequency will change
in short intervals in the downwards or
upwards direction.
If you hold down / , the frequency scan
will speed up.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
To alter the sensitivity level:
• Press lo.m briefly.
If "lo" is displayed, the radio will only pick up
strong, local stations.
If "lo" it off, the radio will also pick up wea-
ker, distant stations.
If "m" light up, manual tuning has been acti-
vated. Please refer to the section on "Ma-
nual tuning" for more information.

Changing the memory bank

You can shift between the memory banks I,
II and T in order to store stations and recall
them later.
The selected memory bank is indicated in
the display.
• Press the BND button as many times
as necessary until the desired memory
bank lights up in the display.

Storing stations

On FM, you can store five stations on the
preset buttons 1, 2, 3, 4, 5 for each of the
memory banks I, II and T.
On MW(AM)/LW(L), you can also store five
stations each.
• Select the desired memory bank.
• Tune in a station with the rocker switch
(either automatically or manually).
• Press and hold down the desired pre-
set button until the radio resumes play
(takes approximately 1 second) or re-
leases a beep.
Now the station has been stored.
The activated preset button is indicated in
the display.
21