Cleaning; Cleaning The Display; Cleaning The Appliance Interior; Cleaning The Equipment - Siemens CI24RP02 User Manual

Cleaning

en
DCleaning
C aution!
C l e a n i n g
Avoid damaging the appliance and the fittings.
Do not use abrasive, chloride or acidic cleaning
■
agents or solvents.
Do not use scouring or abrasive sponges.
■
Metallic surfaces may corrode.
Never clean shelves or containers in the dishwasher.
■
These parts may become deformed.

Cleaning the display

The change in temperature and humidity can cause the
controls to steam up.
Switch the clean lock on before cleaning.
Use a clean microfibre cloth for cleaning.

Cleaning the appliance interior

Proceed as follows:
Pull out the mains plug or switch off the fuse.
1.
Take out the food and store in a cool location.
2.
Place ice pack (if available) on the food.
Clean the appliance with a soft cloth, lukewarm
3.
water and a little pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into the light
or through the drainage hole into the evaporation
area.
Wipe the door seal with clean water and dry
4.
thoroughly with a cloth.
Reconnect appliance, switch on and put in food.
5.

Cleaning the equipment

To clean, take the variable parts out of the appliance.
~ "Features" on page 10
16
lOdours
I f you experience unpleasant odours:
O d o u r s
Pull out the mains plug or switch off the fuse.
1.
Take all food out of the appliance.
2.
Clean the inside.
3.
~ "Cleaning" on page 16
Clean all packages.
4.
Seal strong-smelling food to prevent odours from
5.
forming.
Switch the appliance on again.
6.
Place food in the appliance.
7.
Check whether odours are still occurring after
8.
24 hours.
Change the odour filter.
9.
~ "Changing the odour filter" on page 16

Changing the odour filter

Replacement filters are available from your Customer
Service team.
Open the filter holder with a slotted screwdriver.
1.
Remove the used odour filter and replace with a new
2.
odour filter.
Close the filter holder.
3.