Table of Contents
Advertisement
tqars Your Top Thread IContnuwD
a
Thread Your Needle
e
NOTE:
The numbered steps below follow the numbers on the illustrations.
NOTE:
Dotted lines show places where the thread loops and then is pulled tight. Each place has a spring.
@)6
2.
2
1.
Hold the thread, as shown. Press the thread
5.
Draw the thread down and slip it through the
down until it clicks and comes down under the
right side of the right-hand thread guide, as
hook in the top cover thread guide.
shown.
2. Draw the thread around the thread guide and
6.
Pull the thread to the left and slip it through
4
down into the tension area.
the left thread guide.
3.
Pull the thread up from left to right around the
7.
Slide the thread through the needle bar guide
0[
check spring wire.
on the left.
4.
Draw the thread straight up and from left to
8.
Thread the needle from front to back.
3
right through the slot and into the eye of the
tt
take-up lever.
NOTE:
You may want to cut the end of the
thread
with sharp scissors for easier
6
needle threading.
24
Advertisement
Table of Contents
