Installation - Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular RAID 3Gb/s (SAS1.0)
Connector Type
HDD LED HDD activity
indication LED
iBBU
Figure 5: HDD LED connector
Indicators
LED Description
L1 (AL) Replacement for audible warning
L2 (CD) Write pending (data cached)
3.2.4

Installation

This section describes how to install the SAS RAID controller in a server.
V
CAUTION!
To safeguard against data loss, remember to back up your data before
you change your system configuration.
To install the new controller, proceed as follows:
Step 1 Unpack the controller
Unpack the new controller in a static-free environment. Remove
it from the anti-static bag and inspect it for damage.
If the controller appears to be damaged, contact the Fujitsu
support service.
Step 2 Prepare the server
Turn off the server and remove the cover from the chassis.
24
Description
8-pin connector
Pin 6 to connect activity LED
Connector to attach external iBBU
2 4 6 8
1 3 5 7
Modular RAID Controllers