Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual page 99

Modular raid controllers
Table of Contents

Advertisement

Step 5 Run the BIOS Configuration Utility
Run the BIOS Configuration Utility to configure the physical arrays and
logical drives. Press CTRL+R immediately to run the utility, when the
following message appears on the screen:
Press <Ctrl><R> to Run MegaRAID Configuration Utility
Step 6 Install the operating system driver
The controller can operate under various operating systems. To use
these operating systems, you must install software drivers.
The ServerView Suite DVD 1 includes drivers for the supported
operating systems, along with documentation. You can view the
supported operating systems and download the latest drivers for RAID
adapters on the website at:
For Japan please use the URL:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Modular RAID Controllers
Modular RAID 12Gb/s (SAS3.0)
http://ts.fujitsu.com/support/
99

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents