Table of Contents
Advertisement
Storing Preset Radio Stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
G Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
1
Press TUNER (BAND) to select TUNER mode.
➜ "TUNER" will be displayed. A few seconds
later, the current radio frequency will appear on
the display.
➜ If a FM station is received in stereo,
appear on the display.
To begin automatic preset from a desired
preset number
G Press í or ë to select the desired preset
number.
➜ For those radio stations that had been stored
in one of the preset will not be restored again to
another preset number.
2
Press and hold PROG until "AUTO" appears on
the display.
➜
will start flashing.
PROG
➜ The system will search for all RDS stations
and then continue with radio stations on FM,
MW and LW band respectively.
➜ All available radio stations with sufficient signal
strength will be stored automatically.
➜ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
➜ The last preset radio station or the first
available RDS station will then be played when
completed.
To stop storing the automatic preset
G Press PROG or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Manual Preset Programming
1
Press TUNER (BAND) repeatedly to select the
desired waveband : FM, MW or LW.
2
Press PROG.
➜
PROG
➜ The next available preset number will be
will
displayed for selection.
3
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
To store the radio station to another
preset number
G Press í or ë to select the desired preset
number.
4
Press PROG again to store the radio station.
➜
PROG
G Repeat steps 2–4 to store other preset radio
stations.
Tuning to a weak radio station
G Press à or á briefly and repeatedly until the
optimal reception is found.
To stop storing the manual preset
G Press Ç on the system.
Radio Reception
will start flashing.
will disappear from the display.
19
Advertisement
Table of Contents
