Preparations; Rear Connections - Philips FW-C717/19 User Manual

Preparations

AM loop
antenna
speaker
(right)

Rear Connections

The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
8
R L
LINE
OUT
AUX/
CDR
IN
AM ANTENNA FM ANTENNA
SUBWOOFER
OUT
DIGITAL
OUT
+
R
—
—
L
+
SPEAKERS 6W
AC power cord
B
Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
¶ Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM wire antenna
speaker
(left)
AC
MAINS
Fix the claw
to the slot