Operating Instructions - Westinghouse WHIC02K Instruction Manual

OPERATING INSTRUCTIONS

1. Plug in the AC cord. The buzzer will sound indicating the induction cooker is
now in standby mode.
2. Press/touch the "On/off"button to power up the induction cooktop. The letter
-L-will be displayed on the LED screen.
TEMP:
3.
The temperature level can be selected from 60 - 240 degrees celcius. Place
your induction ready pot or pan onto the induction cooktop and center it over
the Effective induction perimeter ring (2). Press the TEMP button (4) and the
induction cooktop will begin to operate at the factory temperature preset.
Use the "increase and decrease" buttons to select the desired temperature
setting. The setting will be displayed on the LED screen.
*Note* The temperature indicated on the LED screen is to be used as a guide
only. Temperature fluctuations of 20-30 degrees celcius above or below the
selected setting may be experienced depending on pot contents.
4. POWER: (LEFT HOTPLATE 1400W MAX / RIGHT HOTPLATE 1000W MAX)
The power level can be selected from 200 - 1400 watts. Place your induction
ready pot or pan onto the induction cooktop and center it over the Effective
induction perimeter ring (2). Press the POWER button (8) and the induction
cooktop will begin to operate at the factory temperature preset. Use the
increase (7) and decrease (5) buttons to select the desired power setting.
The setting will be displayed on the LED screen.
5. TIMER:
The timer ranges from 1 minute to 180 minutes. To use the timer, select the
desired power or temperature level using the TEMP (4) or Power (8) buttons.
Once temperature or power setting has been selected, press the timer button
(3). The LED screen will display the factory preset time of "0" minutes. Using
the increase (7) and decrease (5) buttons, select the desired time required in
minutes. The unit will automatically power off once the desired amount of
time has been reached.
6. CHILD LOCK:
To engage the child lock, press the increase (7) and decrease (5) buttons
simultaneously. The LED display will display the word "LOC" to indicate the
unit is child locked. To disengage the child lock, hold the increase (7) and
decrease (5) buttons simultaneously for 2 - 3 seconds. The Child lock will
disengage.
7. AUTO-OFF:
When in TEMP or POWER mode, the unit will automatically shut itself off
after a period of 2 hours.
*Note* The Induction Cooktop fan will continue to operate for a period of
2 minutes after the unit has been switched off to cool the internal
components. It is important that the unit is left plugged in and allowed to
complete the cooling cycle in order to ensure long life of the components.
© 2019 RVM Australia Pty Ltd. All Rights Reserved
5