Operating Instructions - Westinghouse WHC643BC User Manual

OPERATING INSTRUCTIONS

Switching the appliance on and off
CONTROL PANEL
Switch on
Touch for 2 seconds
Switch off
Touch for 2 seconds
IMPORTANT TIPS & INFORMATION
After switching on, within approx. 10 seconds a heat
setting or a function must be set, otherwise the appliance
automatically switches itself off.
Setting the heat setting
CONTROL PANEL
To increase
Touch
To decrease Touch
To switch off*
Touch and at the same time
*Function not available for WHC934BA
TIPS & INFORMATION
IMPORTANT
The keep warm setting lies between and
used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware.
TRIPLE COOKING ZONE SENSOR PANEL
To switch on the middle ring
Touch
To switch on the outside ring
Touch
To switch off the outside ring
Touch
To switch off the middle ring
Touch
TIPS & INFORMATION IMPORTANT
Before an outside ring can be switched on, the inside ring
must be switched on.
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor
field, can be locked at any time in order to prevent the settings
being changed e.g. by wiping over the panel with a cloth.
CONTROL PANEL
Switch on
Touch
Switch off
Touch
TIPS & INFORMATION
IMPORTANT
When you switch the appliance off, the locking function is
automatically switched off.
8
OPERATING INSTRUCTIONS
DISPLAY PILOT LIGHT
lights up
/
goes out
/ none
INDICATOR
to
to
. It is
POWER INDICATOR
One power indicator is lit
for 1-2 seconds
Two power indicators are lit
for 1-2 seconds
The second power indicator goes out
for 1-2 seconds
The first power indicator goes out
for 1-2 seconds
DISPLAY
(for 5 seconds)
the previously set heat setting
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm
up function When setting a heat setting using , when
starting from , the cooking zone switches to full power
for a certain amount of time and then automatically
switches back to the heat setting set.
CONTROL PANEL
Switch on (only when starting at
Touch
)
Switch off
Touch
Not used
Touch
TIPS & INFORMATION
IMPORTANT
If during the automatic warm up a higher heat setting
is selected, e.g. from to , the automatic warm up
is adjusted.
HEAT SETTING LENGTH OF THE AUTOMATIC WARM UP (MIN:SEC)
0:30
1:00
1:40
4:50
6:30
10:10
2:00
3:30
4:30
---
The child safety device
The child safety device prevents unintentional use of the
appliance.
Switching on the child safety device:
• Start the hob with . Do not set the heat settings.
• Touch for 4 seconds. The symbol comes on.
• The child safety device is switched on.
Switching off the child safety device:
• Start the hob with . Do not set the heat settings.
Touch for 4 seconds. The symbol comes on.
• Stop the hob with .
• The child safety device is switched off.
TIPS & INFORMATION
IMPORTANT
The child safety device can only be switched on and off,
if no heat setting is set.
DISPLAY PILOT LIGHT
to (after 5 seconds)
to / to
to to
Overriding the child safety device:
The child safety device can be switched off in this
way for a single cooking session; it remains activated
afterwards.
• Start the hob with . The symbol comes on.
• Touch for 4 seconds. The symbol comes on.
Until the appliance is next switched off, it can used as
normal. After switching off the appliance, the child safety
device is active again.
TIPS & INFORMATION IMPORTANT
After overriding the child safety device, a heat setting
or a function must be set within approx. 10 seconds,
otherwise the appliance automatically switches itself off.
OPERATING INSTRUCTIONS
9