Preparations; Fm Wire Antenna; Rear Connections; Antennas Connection - Philips FWM572/AK User Manual

Preparations

FM wire antenna

Rear connections

The type plate is located at the rear of the
system.
A Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
Warning!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
8
FM AERIAL
75W
AUX/
CDR
IN
R L AM ANTENNA
+
R
–
–
L
+
SPEAKERS 6Ω
B Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
MW loop
antenna
AC
MAINS
VOLTAGE
SELECTOR
110V-
127V
220V-
240V
NOT FOR ALL
VERSIONS
AC power cord
2
1
Fix the claw
to the slot
3
MW ANTENNA