Controls On The System And Remote Control - Philips FWM572/AK User Manual

Controls (illustrations on page 3)
Controls on the system and
remote control
1
STANDBY ON B
– to switch the system on or to standby mode.
2
DISC 1/2/3 (CD 1/2/3)
– to select a disc tray for playback.
3
Source selection – to select the following :
CD/USB (on the system only)
– to switch between disc or USB source.
CD (on the remote only)
– to select disc source.
– press repeatedly to select a disc tray for
playback.
TUNER
– to select waveband : FM or MW.
TAPE (TAPE 1/2)
– to select tape deck 1 or 2.
AUX
– to select the input for an additional appliance :
AUX or CDR.
USB DIRECT (on the remote only)
– to select USB source directly.
4
Mode Selection
ALBUM-/+ à á
for MP3-CD/USB . to select previous/next album.
for CD ........................ to search backward/forward.
for Tuner .................... to tune to a lower or higher
for Tape ...................... to rewind or fast forward.
for Clock ................... (on the system only) to set the
STOP Ç
for CD/MP3-CD/USB to stop playback or to
for Tuner .................... (on the system only) to stop
for Tape ...................... to stop playback or recording.
for Demo .................. (on the system only) to
for Clock ................... (on the system only) to exit
for Plug & Play ........ (on the system only) to exit
ÉÅ
for CD/MP3-CD/USB to start or interrupt
10
radio frequency.
hour.
clear a programme.
programming.
activate/deactivate the
demonstration.
clock setting.
plug & play mode.
playback.
for Tape ...................... to start playback.
for Plug & Play ........ (on the system only) to initiate
and start plug & play mode.
TITLE-/+ í /ë PRESET
for MP3-CD/USB . to select previous/next title.
for CD ........................ to skip to the beginning of
the current, previous, or next
track.
for Tuner .................... to select a preset radio
station.
for Clock ................... (on the system only) to set the
minute.
5
DSC
– Selects different type of preset sound equaliser
settings. (OPTIMAL, JAZZ, ROCK or TECHNO)
6
VAC
– Selects different type of ambience-based
equaliser settings. (HALL, CONCERT or
CINEMA)
7
DBB/INC. SURR (DBB/IS)
– to select the desired bass boost level. (DBB 1,
DBB 2, DBB 3 or DBB OFF)
– to activate or deactivate the surround sound
effect.
8
MAX SOUND (MAX)
– to activate or deactivate the optimal mix of
various sound features.
9
REPEAT
– to playback track(s)/disc(s)/programme
repeatedly.
0
SHUFFLE
– Turns on/off the random play mode.