Table of Contents
Advertisement
Preparations
C
Antenna Connection
Connect the supplied MW loop antenna to the
respective terminal. Adjust the position of the
antenna for optimal reception.
MW Antenna
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device's stored music through the
powerful speakers of Hi-Fi system.
●
Insert the USB device's USB plug into the
socket on the set.
For the devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
socket on the set.
2
Insert the other plug of the USB cable to the
USB output terminal of the USB device.
For the memory card:
1
Insert the memory card into a card reader (not
supplied).
8
2
Use a USB cable (not supplied) to connect the
card reader into the
Connecting a non-USB device
Use a cinch cable to connect MP3 PLAYER
IN to the audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder).
Inserting batteries into the
remote control
Insert two batteries type R03 or AAA into the
remote control with the correct polarity as
indicated by the "+"and"-" symbols inside the
battery compartment.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
socket on the set.
Advertisement
Table of Contents
